ctprfs.f

*> \brief \b CTPRFS
*
*  =========== DOCUMENTATION ===========
*
* Online html documentation available at
*            http://www.netlib.org/lapack/explore-html/
*
*> \htmlonly
*> Download CTPRFS + dependencies
*> <a href="http://www.netlib.org/cgi-bin/netlibfiles.tgz?format=tgz&filename=/lapack/lapack_routine/ctprfs.f">
*> [TGZ]</a>
*> <a href="http://www.netlib.org/cgi-bin/netlibfiles.zip?format=zip&filename=/lapack/lapack_routine/ctprfs.f">
*> [ZIP]</a>
*> <a href="http://www.netlib.org/cgi-bin/netlibfiles.txt?format=txt&filename=/lapack/lapack_routine/ctprfs.f">
*> [TXT]</a>
*> \endhtmlonly
*
*  Definition:
*  ===========
*
*       SUBROUTINE CTPRFS( UPLO, TRANS, DIAG, N, NRHS, AP, B, LDB, X, LDX,
*                          FERR, BERR, WORK, RWORK, INFO )
*
*       .. Scalar Arguments ..
*       CHARACTER          DIAG, TRANS, UPLO
*       INTEGER            INFO, LDB, LDX, N, NRHS
*       ..
*       .. Array Arguments ..
*       REAL               BERR( * ), FERR( * ), RWORK( * )
*       COMPLEX            AP( * ), B( LDB, * ), WORK( * ), X( LDX, * )
*       ..
*
*
*> \par Purpose:
*  =============
*>
*> \verbatim
*>
*> CTPRFS provides error bounds and backward error estimates for the
*> solution to a system of linear equations with a triangular packed
*> coefficient matrix.
*>
*> The solution matrix X must be computed by CTPTRS or some other
*> means before entering this routine.  CTPRFS does not do iterative
*> refinement because doing so cannot improve the backward error.
*> \endverbatim
*
*  Arguments:
*  ==========
*
*> \param[in] UPLO
*> \verbatim
*>          UPLO is CHARACTER*1
*>          = 'U':  A is upper triangular;
*>          = 'L':  A is lower triangular.
*> \endverbatim
*>
*> \param[in] TRANS
*> \verbatim
*>          TRANS is CHARACTER*1
*>          Specifies the form of the system of equations:
*>          = 'N':  A * X = B     (No transpose)
*>          = 'T':  A**T * X = B  (Transpose)
*>          = 'C':  A**H * X = B  (Conjugate transpose)
*> \endverbatim
*>
*> \param[in] DIAG
*> \verbatim
*>          DIAG is CHARACTER*1
*>          = 'N':  A is non-unit triangular;
*>          = 'U':  A is unit triangular.
*> \endverbatim
*>
*> \param[in] N
*> \verbatim
*>          N is INTEGER
*>          The order of the matrix A.  N >= 0.
*> \endverbatim
*>
*> \param[in] NRHS
*> \verbatim
*>          NRHS is INTEGER
*>          The number of right hand sides, i.e., the number of columns
*>          of the matrices B and X.  NRHS >= 0.
*> \endverbatim
*>
*> \param[in] AP
*> \verbatim
*>          AP is COMPLEX array, dimension (N*(N+1)/2)
*>          The upper or lower triangular matrix A, packed columnwise in
*>          a linear array.  The j-th column of A is stored in the array
*>          AP as follows:
*>          if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
*>          if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*>          If DIAG = 'U', the diagonal elements of A are not referenced
*>          and are assumed to be 1.
*> \endverbatim
*>
*> \param[in] B
*> \verbatim
*>          B is COMPLEX array, dimension (LDB,NRHS)
*>          The right hand side matrix B.
*> \endverbatim
*>
*> \param[in] LDB
*> \verbatim
*>          LDB is INTEGER
*>          The leading dimension of the array B.  LDB >= max(1,N).
*> \endverbatim
*>
*> \param[in] X
*> \verbatim
*>          X is COMPLEX array, dimension (LDX,NRHS)
*>          The solution matrix X.
*> \endverbatim
*>
*> \param[in] LDX
*> \verbatim
*>          LDX is INTEGER
*>          The leading dimension of the array X.  LDX >= max(1,N).
*> \endverbatim
*>
*> \param[out] FERR
*> \verbatim
*>          FERR is REAL array, dimension (NRHS)
*>          The estimated forward error bound for each solution vector
*>          X(j) (the j-th column of the solution matrix X).
*>          If XTRUE is the true solution corresponding to X(j), FERR(j)
*>          is an estimated upper bound for the magnitude of the largest
*>          element in (X(j) - XTRUE) divided by the magnitude of the
*>          largest element in X(j).  The estimate is as reliable as
*>          the estimate for RCOND, and is almost always a slight
*>          overestimate of the true error.
*> \endverbatim
*>
*> \param[out] BERR
*> \verbatim
*>          BERR is REAL array, dimension (NRHS)
*>          The componentwise relative backward error of each solution
*>          vector X(j) (i.e., the smallest relative change in
*>          any element of A or B that makes X(j) an exact solution).
*> \endverbatim
*>
*> \param[out] WORK
*> \verbatim
*>          WORK is COMPLEX array, dimension (2*N)
*> \endverbatim
*>
*> \param[out] RWORK
*> \verbatim
*>          RWORK is REAL array, dimension (N)
*> \endverbatim
*>
*> \param[out] INFO
*> \verbatim
*>          INFO is INTEGER
*>          = 0:  successful exit
*>          < 0:  if INFO = -i, the i-th argument had an illegal value
*> \endverbatim
*
*  Authors:
*  ========
*
*> \author Univ. of Tennessee
*> \author Univ. of California Berkeley
*> \author Univ. of Colorado Denver
*> \author NAG Ltd.
*
*> \ingroup tprfs
*
*  =====================================================================
      SUBROUTINE ctprfs( UPLO, TRANS, DIAG, N, NRHS, AP, B, LDB, X, LDX,
     $                   FERR, BERR, WORK, RWORK, INFO )
*
*  -- LAPACK computational routine --
*  -- LAPACK is a software package provided by Univ. of Tennessee,    --
*  -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
*
*     .. Scalar Arguments ..
      CHARACTER          DIAG, TRANS, UPLO
      INTEGER            INFO, LDB, LDX, N, NRHS
*     ..
*     .. Array Arguments ..
      REAL               BERR( * ), FERR( * ), RWORK( * )
      COMPLEX            AP( * ), B( ldb, * ), WORK( * ), X( ldx, * )
*     ..
*
*  =====================================================================
*
*     .. Parameters ..
      REAL               ZERO
      parameter( zero = 0.0e+0 )
      COMPLEX            ONE
      parameter( one = ( 1.0e+0, 0.0e+0 ) )
*     ..
*     .. Local Scalars ..
      LOGICAL            NOTRAN, NOUNIT, UPPER
      CHARACTER          TRANSN, TRANST
      INTEGER            I, J, K, KASE, KC, NZ
      REAL               EPS, LSTRES, S, SAFE1, SAFE2, SAFMIN, XK
      COMPLEX            ZDUM
*     ..
*     .. Local Arrays ..
      INTEGER            ISAVE( 3 )
*     ..
*     .. External Subroutines ..
      EXTERNAL           caxpy, ccopy, clacn2, ctpmv, ctpsv, xerbla
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          abs, aimag, max, real
*     ..
*     .. External Functions ..
      LOGICAL            LSAME
      REAL               SLAMCH
      EXTERNAL           lsame, slamch
*     ..
*     .. Statement Functions ..
      REAL               CABS1
*     ..
*     .. Statement Function definitions ..
      cabs1( zdum ) = abs( REAL( ZDUM ) ) + abs( AIMAG( zdum ) )
*     ..
*     .. Executable Statements ..
*
*     Test the input parameters.
*
      info = 0
      upper = lsame( uplo, 'U' )
      notran = lsame( trans, 'N' )
      nounit = lsame( diag, 'N' )
*
      IF( .NOT.upper .AND. .NOT.lsame( uplo, 'L' ) ) THEN
         info = -1
      ELSE IF( .NOT.notran .AND. .NOT.lsame( trans, 'T' ) .AND. .NOT.
     $         lsame( trans, 'C' ) ) THEN
         info = -2
      ELSE IF( .NOT.nounit .AND. .NOT.lsame( diag, 'U' ) ) THEN
         info = -3
      ELSE IF( n.LT.0 ) THEN
         info = -4
      ELSE IF( nrhs.LT.0 ) THEN
         info = -5
      ELSE IF( ldb.LT.max( 1, n ) ) THEN
         info = -8
      ELSE IF( ldx.LT.max( 1, n ) ) THEN
         info = -10
      END IF
      IF( info.NE.0 ) THEN
         CALL xerbla( 'CTPRFS', -info )
         RETURN
      END IF
*
*     Quick return if possible
*
      IF( n.EQ.0 .OR. nrhs.EQ.0 ) THEN
         DO 10 j = 1, nrhs
            ferr( j ) = zero
            berr( j ) = zero
   10    CONTINUE
         RETURN
      END IF
*
      IF( notran ) THEN
         transn = 'N'
         transt = 'C'
      ELSE
         transn = 'C'
         transt = 'N'
      END IF
*
*     NZ = maximum number of nonzero elements in each row of A, plus 1
*
      nz = n + 1
      eps = slamch( 'Epsilon' )
      safmin = slamch( 'Safe minimum' )
      safe1 = nz*safmin
      safe2 = safe1 / eps
*
*     Do for each right hand side
*
      DO 250 j = 1, nrhs
*
*        Compute residual R = B - op(A) * X,
*        where op(A) = A, A**T, or A**H, depending on TRANS.
*
         CALL ccopy( n, x( 1, j ), 1, work, 1 )
         CALL ctpmv( uplo, trans, diag, n, ap, work, 1 )
         CALL caxpy( n, -one, b( 1, j ), 1, work, 1 )
*
*        Compute componentwise relative backward error from formula
*
*        max(i) ( abs(R(i)) / ( abs(op(A))*abs(X) + abs(B) )(i) )
*
*        where abs(Z) is the componentwise absolute value of the matrix
*        or vector Z.  If the i-th component of the denominator is less
*        than SAFE2, then SAFE1 is added to the i-th components of the
*        numerator and denominator before dividing.
*
         DO 20 i = 1, n
            rwork( i ) = cabs1( b( i, j ) )
   20    CONTINUE
*
         IF( notran ) THEN
*
*           Compute abs(A)*abs(X) + abs(B).
*
            IF( upper ) THEN
               kc = 1
               IF( nounit ) THEN
                  DO 40 k = 1, n
                     xk = cabs1( x( k, j ) )
                     DO 30 i = 1, k
                        rwork( i ) = rwork( i ) +
     $                               cabs1( ap( kc+i-1 ) )*xk
   30                CONTINUE
                     kc = kc + k
   40             CONTINUE
               ELSE
                  DO 60 k = 1, n
                     xk = cabs1( x( k, j ) )
                     DO 50 i = 1, k - 1
                        rwork( i ) = rwork( i ) +
     $                               cabs1( ap( kc+i-1 ) )*xk
   50                CONTINUE
                     rwork( k ) = rwork( k ) + xk
                     kc = kc + k
   60             CONTINUE
               END IF
            ELSE
               kc = 1
               IF( nounit ) THEN
                  DO 80 k = 1, n
                     xk = cabs1( x( k, j ) )
                     DO 70 i = k, n
                        rwork( i ) = rwork( i ) +
     $                               cabs1( ap( kc+i-k ) )*xk
   70                CONTINUE
                     kc = kc + n - k + 1
   80             CONTINUE
               ELSE
                  DO 100 k = 1, n
                     xk = cabs1( x( k, j ) )
                     DO 90 i = k + 1, n
                        rwork( i ) = rwork( i ) +
     $                               cabs1( ap( kc+i-k ) )*xk
   90                CONTINUE
                     rwork( k ) = rwork( k ) + xk
                     kc = kc + n - k + 1
  100             CONTINUE
               END IF
            END IF
         ELSE
*
*           Compute abs(A**H)*abs(X) + abs(B).
*
            IF( upper ) THEN
               kc = 1
               IF( nounit ) THEN
                  DO 120 k = 1, n
                     s = zero
                     DO 110 i = 1, k
                        s = s + cabs1( ap( kc+i-1 ) )*cabs1( x( i, j ) )
  110                CONTINUE
                     rwork( k ) = rwork( k ) + s
                     kc = kc + k
  120             CONTINUE
               ELSE
                  DO 140 k = 1, n
                     s = cabs1( x( k, j ) )
                     DO 130 i = 1, k - 1
                        s = s + cabs1( ap( kc+i-1 ) )*cabs1( x( i, j ) )
  130                CONTINUE
                     rwork( k ) = rwork( k ) + s
                     kc = kc + k
  140             CONTINUE
               END IF
            ELSE
               kc = 1
               IF( nounit ) THEN
                  DO 160 k = 1, n
                     s = zero
                     DO 150 i = k, n
                        s = s + cabs1( ap( kc+i-k ) )*cabs1( x( i, j ) )
  150                CONTINUE
                     rwork( k ) = rwork( k ) + s
                     kc = kc + n - k + 1
  160             CONTINUE
               ELSE
                  DO 180 k = 1, n
                     s = cabs1( x( k, j ) )
                     DO 170 i = k + 1, n
                        s = s + cabs1( ap( kc+i-k ) )*cabs1( x( i, j ) )
  170                CONTINUE
                     rwork( k ) = rwork( k ) + s
                     kc = kc + n - k + 1
  180             CONTINUE
               END IF
            END IF
         END IF
         s = zero
         DO 190 i = 1, n
            IF( rwork( i ).GT.safe2 ) THEN
               s = max( s, cabs1( work( i ) ) / rwork( i ) )
            ELSE
               s = max( s, ( cabs1( work( i ) )+safe1 ) /
     $             ( rwork( i )+safe1 ) )
            END IF
  190    CONTINUE
         berr( j ) = s
*
*        Bound error from formula
*
*        norm(X - XTRUE) / norm(X) .le. FERR =
*        norm( abs(inv(op(A)))*
*           ( abs(R) + NZ*EPS*( abs(op(A))*abs(X)+abs(B) ))) / norm(X)
*
*        where
*          norm(Z) is the magnitude of the largest component of Z
*          inv(op(A)) is the inverse of op(A)
*          abs(Z) is the componentwise absolute value of the matrix or
*             vector Z
*          NZ is the maximum number of nonzeros in any row of A, plus 1
*          EPS is machine epsilon
*
*        The i-th component of abs(R)+NZ*EPS*(abs(op(A))*abs(X)+abs(B))
*        is incremented by SAFE1 if the i-th component of
*        abs(op(A))*abs(X) + abs(B) is less than SAFE2.
*
*        Use CLACN2 to estimate the infinity-norm of the matrix
*           inv(op(A)) * diag(W),
*        where W = abs(R) + NZ*EPS*( abs(op(A))*abs(X)+abs(B) )))
*
         DO 200 i = 1, n
            IF( rwork( i ).GT.safe2 ) THEN
               rwork( i ) = cabs1( work( i ) ) + nz*eps*rwork( i )
            ELSE
               rwork( i ) = cabs1( work( i ) ) + nz*eps*rwork( i ) +
     $                      safe1
            END IF
  200    CONTINUE
*
         kase = 0
  210    CONTINUE
         CALL clacn2( n, work( n+1 ), work, ferr( j ), kase, isave )
         IF( kase.NE.0 ) THEN
            IF( kase.EQ.1 ) THEN
*
*              Multiply by diag(W)*inv(op(A)**H).
*
               CALL ctpsv( uplo, transt, diag, n, ap, work, 1 )
               DO 220 i = 1, n
                  work( i ) = rwork( i )*work( i )
  220          CONTINUE
            ELSE
*
*              Multiply by inv(op(A))*diag(W).
*
               DO 230 i = 1, n
                  work( i ) = rwork( i )*work( i )
  230          CONTINUE
               CALL ctpsv( uplo, transn, diag, n, ap, work, 1 )
            END IF
            GO TO 210
         END IF
*
*        Normalize error.
*
         lstres = zero
         DO 240 i = 1, n
            lstres = max( lstres, cabs1( x( i, j ) ) )
  240    CONTINUE
         IF( lstres.NE.zero )
     $      ferr( j ) = ferr( j ) / lstres
*
  250 CONTINUE
*
      RETURN
*
*     End of CTPRFS
*
      END