slaqr5.f

*> \brief \b SLAQR5 performs a single small-bulge multi-shift QR sweep.
*
*  =========== DOCUMENTATION ===========
*
* Online html documentation available at
*            http://www.netlib.org/lapack/explore-html/
*
*> \htmlonly
*> Download SLAQR5 + dependencies
*> <a href="http://www.netlib.org/cgi-bin/netlibfiles.tgz?format=tgz&filename=/lapack/lapack_routine/slaqr5.f">
*> [TGZ]</a>
*> <a href="http://www.netlib.org/cgi-bin/netlibfiles.zip?format=zip&filename=/lapack/lapack_routine/slaqr5.f">
*> [ZIP]</a>
*> <a href="http://www.netlib.org/cgi-bin/netlibfiles.txt?format=txt&filename=/lapack/lapack_routine/slaqr5.f">
*> [TXT]</a>
*> \endhtmlonly
*
*  Definition:
*  ===========
*
*       SUBROUTINE SLAQR5( WANTT, WANTZ, KACC22, N, KTOP, KBOT, NSHFTS,
*                          SR, SI, H, LDH, ILOZ, IHIZ, Z, LDZ, V, LDV, U,
*                          LDU, NV, WV, LDWV, NH, WH, LDWH )
*
*       .. Scalar Arguments ..
*       INTEGER            IHIZ, ILOZ, KACC22, KBOT, KTOP, LDH, LDU, LDV,
*      $                   LDWH, LDWV, LDZ, N, NH, NSHFTS, NV
*       LOGICAL            WANTT, WANTZ
*       ..
*       .. Array Arguments ..
*       REAL               H( LDH, * ), SI( * ), SR( * ), U( LDU, * ),
*      $                   V( LDV, * ), WH( LDWH, * ), WV( LDWV, * ),
*      $                   Z( LDZ, * )
*       ..
*
*
*> \par Purpose:
*  =============
*>
*> \verbatim
*>
*>    SLAQR5, called by SLAQR0, performs a
*>    single small-bulge multi-shift QR sweep.
*> \endverbatim
*
*  Arguments:
*  ==========
*
*> \param[in] WANTT
*> \verbatim
*>          WANTT is LOGICAL
*>             WANTT = .true. if the quasi-triangular Schur factor
*>             is being computed.  WANTT is set to .false. otherwise.
*> \endverbatim
*>
*> \param[in] WANTZ
*> \verbatim
*>          WANTZ is LOGICAL
*>             WANTZ = .true. if the orthogonal Schur factor is being
*>             computed.  WANTZ is set to .false. otherwise.
*> \endverbatim
*>
*> \param[in] KACC22
*> \verbatim
*>          KACC22 is INTEGER with value 0, 1, or 2.
*>             Specifies the computation mode of far-from-diagonal
*>             orthogonal updates.
*>        = 0: SLAQR5 does not accumulate reflections and does not
*>             use matrix-matrix multiply to update far-from-diagonal
*>             matrix entries.
*>        = 1: SLAQR5 accumulates reflections and uses matrix-matrix
*>             multiply to update the far-from-diagonal matrix entries.
*>        = 2: Same as KACC22 = 1. This option used to enable exploiting
*>             the 2-by-2 structure during matrix multiplications, but
*>             this is no longer supported.
*> \endverbatim
*>
*> \param[in] N
*> \verbatim
*>          N is INTEGER
*>             N is the order of the Hessenberg matrix H upon which this
*>             subroutine operates.
*> \endverbatim
*>
*> \param[in] KTOP
*> \verbatim
*>          KTOP is INTEGER
*> \endverbatim
*>
*> \param[in] KBOT
*> \verbatim
*>          KBOT is INTEGER
*>             These are the first and last rows and columns of an
*>             isolated diagonal block upon which the QR sweep is to be
*>             applied. It is assumed without a check that
*>                       either KTOP = 1  or   H(KTOP,KTOP-1) = 0
*>             and
*>                       either KBOT = N  or   H(KBOT+1,KBOT) = 0.
*> \endverbatim
*>
*> \param[in] NSHFTS
*> \verbatim
*>          NSHFTS is INTEGER
*>             NSHFTS gives the number of simultaneous shifts.  NSHFTS
*>             must be positive and even.
*> \endverbatim
*>
*> \param[in,out] SR
*> \verbatim
*>          SR is REAL array, dimension (NSHFTS)
*> \endverbatim
*>
*> \param[in,out] SI
*> \verbatim
*>          SI is REAL array, dimension (NSHFTS)
*>             SR contains the real parts and SI contains the imaginary
*>             parts of the NSHFTS shifts of origin that define the
*>             multi-shift QR sweep.  On output SR and SI may be
*>             reordered.
*> \endverbatim
*>
*> \param[in,out] H
*> \verbatim
*>          H is REAL array, dimension (LDH,N)
*>             On input H contains a Hessenberg matrix.  On output a
*>             multi-shift QR sweep with shifts SR(J)+i*SI(J) is applied
*>             to the isolated diagonal block in rows and columns KTOP
*>             through KBOT.
*> \endverbatim
*>
*> \param[in] LDH
*> \verbatim
*>          LDH is INTEGER
*>             LDH is the leading dimension of H just as declared in the
*>             calling procedure.  LDH >= MAX(1,N).
*> \endverbatim
*>
*> \param[in] ILOZ
*> \verbatim
*>          ILOZ is INTEGER
*> \endverbatim
*>
*> \param[in] IHIZ
*> \verbatim
*>          IHIZ is INTEGER
*>             Specify the rows of Z to which transformations must be
*>             applied if WANTZ is .TRUE.. 1 <= ILOZ <= IHIZ <= N
*> \endverbatim
*>
*> \param[in,out] Z
*> \verbatim
*>          Z is REAL array, dimension (LDZ,IHIZ)
*>             If WANTZ = .TRUE., then the QR Sweep orthogonal
*>             similarity transformation is accumulated into
*>             Z(ILOZ:IHIZ,ILOZ:IHIZ) from the right.
*>             If WANTZ = .FALSE., then Z is unreferenced.
*> \endverbatim
*>
*> \param[in] LDZ
*> \verbatim
*>          LDZ is INTEGER
*>             LDA is the leading dimension of Z just as declared in
*>             the calling procedure. LDZ >= N.
*> \endverbatim
*>
*> \param[out] V
*> \verbatim
*>          V is REAL array, dimension (LDV,NSHFTS/2)
*> \endverbatim
*>
*> \param[in] LDV
*> \verbatim
*>          LDV is INTEGER
*>             LDV is the leading dimension of V as declared in the
*>             calling procedure.  LDV >= 3.
*> \endverbatim
*>
*> \param[out] U
*> \verbatim
*>          U is REAL array, dimension (LDU,2*NSHFTS)
*> \endverbatim
*>
*> \param[in] LDU
*> \verbatim
*>          LDU is INTEGER
*>             LDU is the leading dimension of U just as declared in the
*>             in the calling subroutine.  LDU >= 2*NSHFTS.
*> \endverbatim
*>
*> \param[in] NV
*> \verbatim
*>          NV is INTEGER
*>             NV is the number of rows in WV agailable for workspace.
*>             NV >= 1.
*> \endverbatim
*>
*> \param[out] WV
*> \verbatim
*>          WV is REAL array, dimension (LDWV,2*NSHFTS)
*> \endverbatim
*>
*> \param[in] LDWV
*> \verbatim
*>          LDWV is INTEGER
*>             LDWV is the leading dimension of WV as declared in the
*>             in the calling subroutine.  LDWV >= NV.
*> \endverbatim
*
*> \param[in] NH
*> \verbatim
*>          NH is INTEGER
*>             NH is the number of columns in array WH available for
*>             workspace. NH >= 1.
*> \endverbatim
*>
*> \param[out] WH
*> \verbatim
*>          WH is REAL array, dimension (LDWH,NH)
*> \endverbatim
*>
*> \param[in] LDWH
*> \verbatim
*>          LDWH is INTEGER
*>             Leading dimension of WH just as declared in the
*>             calling procedure.  LDWH >= 2*NSHFTS.
*> \endverbatim
*>
*  Authors:
*  ========
*
*> \author Univ. of Tennessee
*> \author Univ. of California Berkeley
*> \author Univ. of Colorado Denver
*> \author NAG Ltd.
*
*> \ingroup laqr5
*
*> \par Contributors:
*  ==================
*>
*>       Karen Braman and Ralph Byers, Department of Mathematics,
*>       University of Kansas, USA
*>
*>       Lars Karlsson, Daniel Kressner, and Bruno Lang
*>
*>       Thijs Steel, Department of Computer science,
*>       KU Leuven, Belgium
*
*> \par References:
*  ================
*>
*>       K. Braman, R. Byers and R. Mathias, The Multi-Shift QR
*>       Algorithm Part I: Maintaining Well Focused Shifts, and Level 3
*>       Performance, SIAM Journal of Matrix Analysis, volume 23, pages
*>       929--947, 2002.
*>
*>       Lars Karlsson, Daniel Kressner, and Bruno Lang, Optimally packed
*>       chains of bulges in multishift QR algorithms.
*>       ACM Trans. Math. Softw. 40, 2, Article 12 (February 2014).
*>
*  =====================================================================
      SUBROUTINE slaqr5( WANTT, WANTZ, KACC22, N, KTOP, KBOT, NSHFTS,
     $                   SR, SI, H, LDH, ILOZ, IHIZ, Z, LDZ, V, LDV, U,
     $                   LDU, NV, WV, LDWV, NH, WH, LDWH )
      IMPLICIT NONE
*
*  -- LAPACK auxiliary routine --
*  -- LAPACK is a software package provided by Univ. of Tennessee,    --
*  -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
*
*     .. Scalar Arguments ..
      INTEGER            IHIZ, ILOZ, KACC22, KBOT, KTOP, LDH, LDU, LDV,
     $                   ldwh, ldwv, ldz, n, nh, nshfts, nv
      LOGICAL            WANTT, WANTZ
*     ..
*     .. Array Arguments ..
      REAL               H( ldh, * ), SI( * ), SR( * ), U( ldu, * ),
     $                   v( ldv, * ), wh( ldwh, * ), wv( ldwv, * ),
     $                   z( ldz, * )
*     ..
*
*  ================================================================
*     .. Parameters ..
      REAL               ZERO, ONE
      parameter( zero = 0.0e0, one = 1.0e0 )
*     ..
*     .. Local Scalars ..
      REAL               ALPHA, BETA, H11, H12, H21, H22, REFSUM,
     $                   safmax, safmin, scl, smlnum, swap, t1, t2,
     $                   t3, tst1, tst2, ulp
      INTEGER            I, I2, I4, INCOL, J, JBOT, JCOL, JLEN,
     $                   jrow, jtop, k, k1, kdu, kms, krcol,
     $                   m, m22, mbot, mtop, nbmps, ndcol,
     $                   ns, nu
      LOGICAL            ACCUM, BMP22
*     ..
*     .. External Functions ..
      REAL               SLAMCH
      EXTERNAL           slamch
*     ..
*     .. Intrinsic Functions ..
*
      INTRINSIC          abs, max, min, mod, real
*     ..
*     .. Local Arrays ..
      REAL               VT( 3 )
*     ..
*     .. External Subroutines ..
      EXTERNAL           sgemm, slabad, slacpy, slaqr1, slarfg, slaset,
     $                   strmm
*     ..
*     .. Executable Statements ..
*
*     ==== If there are no shifts, then there is nothing to do. ====
*
      IF( nshfts.LT.2 )
     $   RETURN
*
*     ==== If the active block is empty or 1-by-1, then there
*     .    is nothing to do. ====
*
      IF( ktop.GE.kbot )
     $   RETURN
*
*     ==== Shuffle shifts into pairs of real shifts and pairs
*     .    of complex conjugate shifts assuming complex
*     .    conjugate shifts are already adjacent to one
*     .    another. ====
*
      DO 10 i = 1, nshfts - 2, 2
         IF( si( i ).NE.-si( i+1 ) ) THEN
*
            swap = sr( i )
            sr( i ) = sr( i+1 )
            sr( i+1 ) = sr( i+2 )
            sr( i+2 ) = swap
*
            swap = si( i )
            si( i ) = si( i+1 )
            si( i+1 ) = si( i+2 )
            si( i+2 ) = swap
         END IF
   10 CONTINUE
*
*     ==== NSHFTS is supposed to be even, but if it is odd,
*     .    then simply reduce it by one.  The shuffle above
*     .    ensures that the dropped shift is real and that
*     .    the remaining shifts are paired. ====
*
      ns = nshfts - mod( nshfts, 2 )
*
*     ==== Machine constants for deflation ====
*
      safmin = slamch( 'SAFE MINIMUM' )
      safmax = one / safmin
      CALL slabad( safmin, safmax )
      ulp = slamch( 'PRECISION' )
      smlnum = safmin*( REAL( N ) / ULP )
*
*     ==== Use accumulated reflections to update far-from-diagonal
*     .    entries ? ====
*
      accum = ( kacc22.EQ.1 ) .OR. ( kacc22.EQ.2 )
*
*     ==== clear trash ====
*
      IF( ktop+2.LE.kbot )
     $   h( ktop+2, ktop ) = zero
*
*     ==== NBMPS = number of 2-shift bulges in the chain ====
*
      nbmps = ns / 2
*
*     ==== KDU = width of slab ====
*
      kdu = 4*nbmps
*
*     ==== Create and chase chains of NBMPS bulges ====
*
      DO 180 incol = ktop - 2*nbmps + 1, kbot - 2, 2*nbmps
*
*        JTOP = Index from which updates from the right start.
*
         IF( accum ) THEN
            jtop = max( ktop, incol )
         ELSE IF( wantt ) THEN
            jtop = 1
         ELSE
            jtop = ktop
         END IF
*
         ndcol = incol + kdu
         IF( accum )
     $      CALL slaset( 'ALL', kdu, kdu, zero, one, u, ldu )
*
*        ==== Near-the-diagonal bulge chase.  The following loop
*        .    performs the near-the-diagonal part of a small bulge
*        .    multi-shift QR sweep.  Each 4*NBMPS column diagonal
*        .    chunk extends from column INCOL to column NDCOL
*        .    (including both column INCOL and column NDCOL). The
*        .    following loop chases a 2*NBMPS+1 column long chain of
*        .    NBMPS bulges 2*NBMPS-1 columns to the right.  (INCOL
*        .    may be less than KTOP and and NDCOL may be greater than
*        .    KBOT indicating phantom columns from which to chase
*        .    bulges before they are actually introduced or to which
*        .    to chase bulges beyond column KBOT.)  ====
*
         DO 145 krcol = incol, min( incol+2*nbmps-1, kbot-2 )
*
*           ==== Bulges number MTOP to MBOT are active double implicit
*           .    shift bulges.  There may or may not also be small
*           .    2-by-2 bulge, if there is room.  The inactive bulges
*           .    (if any) must wait until the active bulges have moved
*           .    down the diagonal to make room.  The phantom matrix
*           .    paradigm described above helps keep track.  ====
*
            mtop = max( 1, ( ktop-krcol ) / 2+1 )
            mbot = min( nbmps, ( kbot-krcol-1 ) / 2 )
            m22 = mbot + 1
            bmp22 = ( mbot.LT.nbmps ) .AND. ( krcol+2*( m22-1 ) ).EQ.
     $              ( kbot-2 )
*
*           ==== Generate reflections to chase the chain right
*           .    one column.  (The minimum value of K is KTOP-1.) ====
*
            IF ( bmp22 ) THEN
*
*              ==== Special case: 2-by-2 reflection at bottom treated
*              .    separately ====
*
               k = krcol + 2*( m22-1 )
               IF( k.EQ.ktop-1 ) THEN
                  CALL slaqr1( 2, h( k+1, k+1 ), ldh, sr( 2*m22-1 ),
     $                         si( 2*m22-1 ), sr( 2*m22 ), si( 2*m22 ),
     $                         v( 1, m22 ) )
                  beta = v( 1, m22 )
                  CALL slarfg( 2, beta, v( 2, m22 ), 1, v( 1, m22 ) )
               ELSE
                  beta = h( k+1, k )
                  v( 2, m22 ) = h( k+2, k )
                  CALL slarfg( 2, beta, v( 2, m22 ), 1, v( 1, m22 ) )
                  h( k+1, k ) = beta
                  h( k+2, k ) = zero
               END IF

*
*              ==== Perform update from right within 
*              .    computational window. ====
*
               t1 = v( 1, m22 )
               t2 = t1*v( 2, m22 )
               DO 30 j = jtop, min( kbot, k+3 )
                  refsum = h( j, k+1 ) + v( 2, m22 )*h( j, k+2 )
                  h( j, k+1 ) = h( j, k+1 ) - refsum*t1
                  h( j, k+2 ) = h( j, k+2 ) - refsum*t2
   30          CONTINUE
*
*              ==== Perform update from left within 
*              .    computational window. ====
*
               IF( accum ) THEN
                  jbot = min( ndcol, kbot )
               ELSE IF( wantt ) THEN
                  jbot = n
               ELSE
                  jbot = kbot
               END IF
               t1 = v( 1, m22 )
               t2 = t1*v( 2, m22 )
               DO 40 j = k+1, jbot
                  refsum = h( k+1, j ) + v( 2, m22 )*h( k+2, j )
                  h( k+1, j ) = h( k+1, j ) - refsum*t1
                  h( k+2, j ) = h( k+2, j ) - refsum*t2
   40          CONTINUE
*
*              ==== The following convergence test requires that
*              .    the tradition small-compared-to-nearby-diagonals
*              .    criterion and the Ahues & Tisseur (LAWN 122, 1997)
*              .    criteria both be satisfied.  The latter improves
*              .    accuracy in some examples. Falling back on an
*              .    alternate convergence criterion when TST1 or TST2
*              .    is zero (as done here) is traditional but probably
*              .    unnecessary. ====
*
               IF( k.GE.ktop ) THEN
                  IF( h( k+1, k ).NE.zero ) THEN
                     tst1 = abs( h( k, k ) ) + abs( h( k+1, k+1 ) )
                     IF( tst1.EQ.zero ) THEN
                        IF( k.GE.ktop+1 )
     $                     tst1 = tst1 + abs( h( k, k-1 ) )
                        IF( k.GE.ktop+2 )
     $                     tst1 = tst1 + abs( h( k, k-2 ) )
                        IF( k.GE.ktop+3 )
     $                     tst1 = tst1 + abs( h( k, k-3 ) )
                        IF( k.LE.kbot-2 )
     $                     tst1 = tst1 + abs( h( k+2, k+1 ) )
                        IF( k.LE.kbot-3 )
     $                     tst1 = tst1 + abs( h( k+3, k+1 ) )
                        IF( k.LE.kbot-4 )
     $                     tst1 = tst1 + abs( h( k+4, k+1 ) )
                     END IF
                     IF( abs( h( k+1, k ) ).LE.max( smlnum, ulp*tst1 ) )
     $                    THEN
                        h12 = max( abs( h( k+1, k ) ),
     $                             abs( h( k, k+1 ) ) )
                        h21 = min( abs( h( k+1, k ) ),
     $                             abs( h( k, k+1 ) ) )
                        h11 = max( abs( h( k+1, k+1 ) ),
     $                        abs( h( k, k )-h( k+1, k+1 ) ) )
                        h22 = min( abs( h( k+1, k+1 ) ),
     $                        abs( h( k, k )-h( k+1, k+1 ) ) )
                        scl = h11 + h12
                        tst2 = h22*( h11 / scl )
*
                        IF( tst2.EQ.zero .OR. h21*( h12 / scl ).LE.
     $                      max( smlnum, ulp*tst2 ) ) THEN
                           h( k+1, k ) = zero
                        END IF
                     END IF
                  END IF
               END IF
*
*              ==== Accumulate orthogonal transformations. ====
*
               IF( accum ) THEN
                  kms = k - incol
                  t1 = v( 1, m22 )
                  t2 = t1*v( 2, m22 )
                  DO 50 j = max( 1, ktop-incol ), kdu
                     refsum = u( j, kms+1 ) + v( 2, m22 )*u( j, kms+2 )
                     u( j, kms+1 ) = u( j, kms+1 ) - refsum*t1
                     u( j, kms+2 ) = u( j, kms+2 ) - refsum*t2
  50                 CONTINUE
               ELSE IF( wantz ) THEN
                  t1 = v( 1, m22 )
                  t2 = t1*v( 2, m22 )
                  DO 60 j = iloz, ihiz
                     refsum = z( j, k+1 )+v( 2, m22 )*z( j, k+2 )
                     z( j, k+1 ) = z( j, k+1 ) - refsum*t1
                     z( j, k+2 ) = z( j, k+2 ) - refsum*t2
  60              CONTINUE
               END IF
            END IF
*
*           ==== Normal case: Chain of 3-by-3 reflections ====
*
            DO 80 m = mbot, mtop, -1
               k = krcol + 2*( m-1 )
               IF( k.EQ.ktop-1 ) THEN
                  CALL slaqr1( 3, h( ktop, ktop ), ldh, sr( 2*m-1 ),
     $                         si( 2*m-1 ), sr( 2*m ), si( 2*m ),
     $                         v( 1, m ) )
                  alpha = v( 1, m )
                  CALL slarfg( 3, alpha, v( 2, m ), 1, v( 1, m ) )
               ELSE
*
*                 ==== Perform delayed transformation of row below
*                 .    Mth bulge. Exploit fact that first two elements
*                 .    of row are actually zero. ====
*
                  refsum = v( 1, m )*v( 3, m )*h( k+3, k+2 )
                  h( k+3, k   ) = -refsum
                  h( k+3, k+1 ) = -refsum*v( 2, m )
                  h( k+3, k+2 ) = h( k+3, k+2 ) - refsum*v( 3, m )
*
*                 ==== Calculate reflection to move
*                 .    Mth bulge one step. ====
*
                  beta      = h( k+1, k )
                  v( 2, m ) = h( k+2, k )
                  v( 3, m ) = h( k+3, k )
                  CALL slarfg( 3, beta, v( 2, m ), 1, v( 1, m ) )
*
*                 ==== A Bulge may collapse because of vigilant
*                 .    deflation or destructive underflow.  In the
*                 .    underflow case, try the two-small-subdiagonals
*                 .    trick to try to reinflate the bulge.  ====
*
                  IF( h( k+3, k ).NE.zero .OR. h( k+3, k+1 ).NE.
     $                zero .OR. h( k+3, k+2 ).EQ.zero ) THEN
*
*                    ==== Typical case: not collapsed (yet). ====
*
                     h( k+1, k ) = beta
                     h( k+2, k ) = zero
                     h( k+3, k ) = zero
                  ELSE
*
*                    ==== Atypical case: collapsed.  Attempt to
*                    .    reintroduce ignoring H(K+1,K) and H(K+2,K).
*                    .    If the fill resulting from the new
*                    .    reflector is too large, then abandon it.
*                    .    Otherwise, use the new one. ====
*
                     CALL slaqr1( 3, h( k+1, k+1 ), ldh, sr( 2*m-1 ),
     $                            si( 2*m-1 ), sr( 2*m ), si( 2*m ),
     $                            vt )
                     alpha = vt( 1 )
                     CALL slarfg( 3, alpha, vt( 2 ), 1, vt( 1 ) )
                     refsum = vt( 1 )*( h( k+1, k )+vt( 2 )*
     $                        h( k+2, k ) )
*
                     IF( abs( h( k+2, k )-refsum*vt( 2 ) )+
     $                   abs( refsum*vt( 3 ) ).GT.ulp*
     $                   ( abs( h( k, k ) )+abs( h( k+1,
     $                   k+1 ) )+abs( h( k+2, k+2 ) ) ) ) THEN
*
*                       ==== Starting a new bulge here would
*                       .    create non-negligible fill.  Use
*                       .    the old one with trepidation. ====
*
                        h( k+1, k ) = beta
                        h( k+2, k ) = zero
                        h( k+3, k ) = zero
                     ELSE
*
*                       ==== Starting a new bulge here would
*                       .    create only negligible fill.
*                       .    Replace the old reflector with
*                       .    the new one. ====
*
                        h( k+1, k ) = h( k+1, k ) - refsum
                        h( k+2, k ) = zero
                        h( k+3, k ) = zero
                        v( 1, m ) = vt( 1 )
                        v( 2, m ) = vt( 2 )
                        v( 3, m ) = vt( 3 )
                     END IF
                  END IF
               END IF
*
*              ====  Apply reflection from the right and
*              .     the first column of update from the left.
*              .     These updates are required for the vigilant
*              .     deflation check. We still delay most of the
*              .     updates from the left for efficiency. ====      
*
               t1 = v( 1, m )
               t2 = t1*v( 2, m )
               t3 = t1*v( 3, m )
               DO 70 j = jtop, min( kbot, k+3 )
                  refsum = h( j, k+1 ) + v( 2, m )*h( j, k+2 )
     $                     + v( 3, m )*h( j, k+3 )
                  h( j, k+1 ) = h( j, k+1 ) - refsum*t1
                  h( j, k+2 ) = h( j, k+2 ) - refsum*t2
                  h( j, k+3 ) = h( j, k+3 ) - refsum*t3
   70          CONTINUE
*
*              ==== Perform update from left for subsequent
*              .    column. ====
*
               refsum = h( k+1, k+1 ) + v( 2, m )*h( k+2, k+1 )
     $                  + v( 3, m )*h( k+3, k+1 )
               h( k+1, k+1 ) = h( k+1, k+1 ) - refsum*t1
               h( k+2, k+1 ) = h( k+2, k+1 ) - refsum*t2
               h( k+3, k+1 ) = h( k+3, k+1 ) - refsum*t3
*
*              ==== The following convergence test requires that
*              .    the tradition small-compared-to-nearby-diagonals
*              .    criterion and the Ahues & Tisseur (LAWN 122, 1997)
*              .    criteria both be satisfied.  The latter improves
*              .    accuracy in some examples. Falling back on an
*              .    alternate convergence criterion when TST1 or TST2
*              .    is zero (as done here) is traditional but probably
*              .    unnecessary. ====
*
               IF( k.LT.ktop)
     $              cycle
               IF( h( k+1, k ).NE.zero ) THEN
                  tst1 = abs( h( k, k ) ) + abs( h( k+1, k+1 ) )
                  IF( tst1.EQ.zero ) THEN
                     IF( k.GE.ktop+1 )
     $                  tst1 = tst1 + abs( h( k, k-1 ) )
                     IF( k.GE.ktop+2 )
     $                  tst1 = tst1 + abs( h( k, k-2 ) )
                     IF( k.GE.ktop+3 )
     $                  tst1 = tst1 + abs( h( k, k-3 ) )
                     IF( k.LE.kbot-2 )
     $                  tst1 = tst1 + abs( h( k+2, k+1 ) )
                     IF( k.LE.kbot-3 )
     $                  tst1 = tst1 + abs( h( k+3, k+1 ) )
                     IF( k.LE.kbot-4 )
     $                  tst1 = tst1 + abs( h( k+4, k+1 ) )
                  END IF
                  IF( abs( h( k+1, k ) ).LE.max( smlnum, ulp*tst1 ) )
     $                 THEN
                     h12 = max( abs( h( k+1, k ) ), abs( h( k, k+1 ) ) )
                     h21 = min( abs( h( k+1, k ) ), abs( h( k, k+1 ) ) )
                     h11 = max( abs( h( k+1, k+1 ) ),
     $                     abs( h( k, k )-h( k+1, k+1 ) ) )
                     h22 = min( abs( h( k+1, k+1 ) ),
     $                     abs( h( k, k )-h( k+1, k+1 ) ) )
                     scl = h11 + h12
                     tst2 = h22*( h11 / scl )
*
                     IF( tst2.EQ.zero .OR. h21*( h12 / scl ).LE.
     $                   max( smlnum, ulp*tst2 ) ) THEN
                        h( k+1, k ) = zero
                     END IF
                  END IF
               END IF
   80       CONTINUE
*
*           ==== Multiply H by reflections from the left ====
*
            IF( accum ) THEN
               jbot = min( ndcol, kbot )
            ELSE IF( wantt ) THEN
               jbot = n
            ELSE
               jbot = kbot
            END IF
*
            DO 100 m = mbot, mtop, -1
               k = krcol + 2*( m-1 )
               t1 = v( 1, m )
               t2 = t1*v( 2, m )
               t3 = t1*v( 3, m )
               DO 90 j = max( ktop, krcol + 2*m ), jbot
                  refsum = h( k+1, j ) + v( 2, m )*h( k+2, j )
     $                     + v( 3, m )*h( k+3, j )
                  h( k+1, j ) = h( k+1, j ) - refsum*t1
                  h( k+2, j ) = h( k+2, j ) - refsum*t2
                  h( k+3, j ) = h( k+3, j ) - refsum*t3
   90          CONTINUE
  100       CONTINUE
*
*           ==== Accumulate orthogonal transformations. ====
*
            IF( accum ) THEN
*
*              ==== Accumulate U. (If needed, update Z later
*              .    with an efficient matrix-matrix
*              .    multiply.) ====
*
               DO 120 m = mbot, mtop, -1
                  k = krcol + 2*( m-1 )
                  kms = k - incol
                  i2 = max( 1, ktop-incol )
                  i2 = max( i2, kms-(krcol-incol)+1 )
                  i4 = min( kdu, krcol + 2*( mbot-1 ) - incol + 5 )
                  t1 = v( 1, m )
                  t2 = t1*v( 2, m )
                  t3 = t1*v( 3, m )
                  DO 110 j = i2, i4
                     refsum = u( j, kms+1 ) + v( 2, m )*u( j, kms+2 )
     $                        + v( 3, m )*u( j, kms+3 )
                     u( j, kms+1 ) = u( j, kms+1 ) - refsum*t1
                     u( j, kms+2 ) = u( j, kms+2 ) - refsum*t2
                     u( j, kms+3 ) = u( j, kms+3 ) - refsum*t3
  110             CONTINUE
  120          CONTINUE
            ELSE IF( wantz ) THEN
*
*              ==== U is not accumulated, so update Z
*              .    now by multiplying by reflections
*              .    from the right. ====
*
               DO 140 m = mbot, mtop, -1
                  k = krcol + 2*( m-1 )
                  t1 = v( 1, m )
                  t2 = t1*v( 2, m )
                  t3 = t1*v( 3, m )
                  DO 130 j = iloz, ihiz
                     refsum = z( j, k+1 ) + v( 2, m )*z( j, k+2 )
     $                        + v( 3, m )*z( j, k+3 )
                     z( j, k+1 ) = z( j, k+1 ) - refsum*t1
                     z( j, k+2 ) = z( j, k+2 ) - refsum*t2
                     z( j, k+3 ) = z( j, k+3 ) - refsum*t3
  130             CONTINUE
  140          CONTINUE
            END IF
*
*           ==== End of near-the-diagonal bulge chase. ====
*
  145    CONTINUE
*
*        ==== Use U (if accumulated) to update far-from-diagonal
*        .    entries in H.  If required, use U to update Z as
*        .    well. ====
*
         IF( accum ) THEN
            IF( wantt ) THEN
               jtop = 1
               jbot = n
            ELSE
               jtop = ktop
               jbot = kbot
            END IF
            k1 = max( 1, ktop-incol )
            nu = ( kdu-max( 0, ndcol-kbot ) ) - k1 + 1
*
*           ==== Horizontal Multiply ====
*
            DO 150 jcol = min( ndcol, kbot ) + 1, jbot, nh
               jlen = min( nh, jbot-jcol+1 )
               CALL sgemm( 'C', 'N', nu, jlen, nu, one, u( k1, k1 ),
     $                     ldu, h( incol+k1, jcol ), ldh, zero, wh,
     $                     ldwh )
               CALL slacpy( 'ALL', nu, jlen, wh, ldwh,
     $                      h( incol+k1, jcol ), ldh )
  150       CONTINUE
*
*           ==== Vertical multiply ====
*
            DO 160 jrow = jtop, max( ktop, incol ) - 1, nv
               jlen = min( nv, max( ktop, incol )-jrow )
               CALL sgemm( 'N', 'N', jlen, nu, nu, one,
     $                     h( jrow, incol+k1 ), ldh, u( k1, k1 ),
     $                     ldu, zero, wv, ldwv )
               CALL slacpy( 'ALL', jlen, nu, wv, ldwv,
     $                      h( jrow, incol+k1 ), ldh )
  160       CONTINUE
*
*           ==== Z multiply (also vertical) ====
*
            IF( wantz ) THEN
               DO 170 jrow = iloz, ihiz, nv
                  jlen = min( nv, ihiz-jrow+1 )
                  CALL sgemm( 'N', 'N', jlen, nu, nu, one,
     $                        z( jrow, incol+k1 ), ldz, u( k1, k1 ),
     $                        ldu, zero, wv, ldwv )
                  CALL slacpy( 'ALL', jlen, nu, wv, ldwv,
     $                         z( jrow, incol+k1 ), ldz )
  170          CONTINUE
            END IF
         END IF
  180 CONTINUE
*
*     ==== End of SLAQR5 ====
*
      END